How to Set Up BrosTrend WiFi Extender?
1. Unbox and Plug It In
Take it out of the box, plug it into a wall outlet halfway between your router and the area with poor WiFi. Don’t stick it behind a couch or in a cabinet-it needs air and visibility for the antennas to work properly.

Pro tip: Make sure it’s not too far from the router during Brostrend WiFi Extender Setup. You can move it later.

2. Connect via WPS (Easiest Method)
If your router has a WPS button, this method is very simple.

Press the WPS button on your router.
Within 2 minutes, press the WPS button on the extender.
Watch the LEDs. The signal indicator should light up solid once the connection is made.
That’s it. Once you’ve got a solid connection, you can move the extender to a more useful spot.

Connect via WPS (Easiest Method)
3. No WPS? Set It Up Manually (Still Easy)
If your router doesn’t have WPS, follow these manual steps:

Plug in the extender.

On your phone or laptop, go to WiFi settings and connect to a network named something like Brostrend_EXT.

Open a browser and type in: http://re.brostrend.com or 192.168.0.254
No WPS? Set It Up Manually (Still Easy)

You’ll land on the Brostrend Wifi Extender setup page.

Choose your existing WiFi network, enter your password, and hit connect.

Wait for the extender to configure (about 30–60 seconds).

Once you see the confirmation screen, reconnect your device to your original WiFi network or the extended network (which will usually have "_EXT" at the end).